Worked through prints to ensure I was mounting the Nose Ribs, Main Ribs, Flap Cove and Aileron cove ribs correctly. My progress was slowed due to a number of parts being labeled incorrectly and/or conflicting information between reference prints.
Item #9 and #10 are either labeled incorrectly (swapped) on the part OR Figure 17 is incorrect. The P/N`s on Figure 7.1 are not correct for these items either. I installed them with the correct orientation based table 3 and description w/n instructions.
Item #46 & #47 are either labeled incorrectly (swapped) on the part OR Figure 17 is incorrect. The P/N`s on Figure 7.1 are swapped too. I installed them with the correct orientation based on table 2 and description w/n instructions.
Aileron cove ribs were correct however there is a discrepancy between Figure 7.1, Cove # 5. It shows `inboard` on Figure 7.1 and `outboard` on Figure 17 AND Table 5. I installed as `outboard` (Item #13, P/N 201-00007-01).
Otherwise...all went well!